fag:felles:tegninger-en
Forskjeller
Her vises forskjeller mellom den valgte versjonen og den nåværende versjonen av dokumentet.
Begge sider forrige revisjonForrige revisjonNeste revisjon | Forrige revisjonNeste revisjonBegge sider neste revisjon | ||
fag:felles:tegninger-en [2019/09/12 07:59] – [Result Models] stun | fag:felles:tegninger-en [2019/09/12 11:00] – [Stikningsdata] stun | ||
---|---|---|---|
Linje 33: | Linje 33: | ||
==== Coordination model ==== | ==== Coordination model ==== | ||
- | The model must be updated regularly, in accordance with the updating of subject models, throughout the design phase. As a prerequisite for the project, intervals of 14 days should be added, unless otherwise defined in the project. | + | The model must be updated regularly, in accordance with the updating of subject models, throughout the design phase. As a prerequisite for the project, intervals of 14 days should be agreed, unless otherwise defined in the project. |
- | An updated version of the subject model is regularly posted on the agreed catalog, and the message is sent as agreed to the coordinator in advance of design | + | An updated version of the subject model is regularly posted on the agreed catalog, and the message is sent as agreed to the coordinator in advance of project |
- | The coordination model can be the starting point for design | + | The coordination model can be the starting point for project |
- | + | ||
- | It is important that all deliveries in different subjects are coordinated so that an updated model can be reviewed at the agreed design meetings to get the full effect out of the design. | + | |
- | Coordination models to be used for various purposes such as result, presentation, | + | |
+ | It is important that all deliveries in different subjects are coordinated so that an updated model can be reviewed at the agreed project meetings to get the full effect of the design. Coordination models to be used for various purposes such as result, presentation or source model are arranged so that all subject models are copied into the model to be developed. If the references are removed, the model will no longer be updated. | ||
Linje 48: | Linje 46: | ||
==== Result Models ==== | ==== Result Models ==== | ||
- | * Delivered to the client | + | * Delivered to the builder |
* Supplied with the competitive basis for contractors. | * Supplied with the competitive basis for contractors. | ||
* Delivered at all site phase audits | * Delivered at all site phase audits | ||
* Supplied with all surveying data | * Supplied with all surveying data | ||
* Comes updated with "as built" status at the end of the project | * Comes updated with "as built" status at the end of the project | ||
- | ==== Visningsmodell | + | ==== Display Model ==== |
- | * Leveres til oppdragsgiver | + | * Delivered to the client |
- | * Leveres med konkurransegrunnlaget til entreprenører | + | * Supplied with the competitive basis to the contractors |
- | * Leveres ved alle revisjoner i anleggsfasen | + | * Delivered |
- | * Leveres oppdatert med "som bygget" status | + | * Updated with "as built" status |
+ | ==== Presentation Model ==== | ||
- | ==== Presentasjonsmodell ==== | + | Needs and deliveries are agreed with the client and defined in the contract. |
- | Behov og leveranser avtales med oppdragsgiver og defineres i kontrakt. | + | ==== source Models ==== |
- | ==== Kildemodeller ==== | + | Comes updated with "as built" status at the end of the project |
- | Leveres oppdatert med "som bygget" | ||
+ | ===== Drawing Deliveries ===== | ||
- | ===== Tegningsleveranser ===== | + | It is a goal of limited |
- | Det er et mål å begrense leveransen av tegninger til det som er gitt som tekniske krav til dokumentasjon og det som er nødvendig | + | There is developed a table of what should be delivered. The project must clarify the need for other drawings based on the nature and peculiarities of the project with the project. |
- | Det er utarbeidet en retningsgivende tabell over hva som bør leveres. Prosjektet må avklare behov for andre tegninger ut fra prosjektets karakter og særegenheter med prosjektet. | + | {{ fag: |
- | {{ fag: | + | ===== Data Security ===== |
- | ===== Datasikkerhet ===== | + | All data files must be placed on the project server and / or project hotel, so that everyone can access them. |
+ | It should not be files on private hard drives and directories. The exception is work that have no interest in others. | ||
- | Alle datafiler skal ligge på prosjektets server og/eller prosjekthotell, | + | Daily backup (backup) of all vital data in the project shall be carried out. |
- | Det skal ikke arbeides på private harddisker og kataloger. Unntaket er arbeidskladder som ikke har interesse for andre. | + | |
- | Det skal foretas daglig sikkerhetskopiering (backup) av alle vitale data i prosjektet. | + | No changes shall be made to any of the models after the model has been finalized, without special agreement from the model manager. This must in the case be displayed in the model log. |
- | + | ||
- | Det skal ikke gjøres endringer på noen fagmodeller etter at modellen er ferdigstilt, uten spesiell avtale fra modellansvarlig. Dette må i tilfelle fremkomme i modell-loggen. | + | |
- | ===== Kvalitetssikring | + | ===== Quality Assurance |
- | + | ||
- | Alle fagmodeller og tegninger skal oppdateres samtidig. | + | |
- | Prosjekterende skal gjennomgå prosedyrene for å kvalitetssikre innholdet. Om det ikke er avtalt andre kvalitetssikringsmetoder så skal underliggende punkter benyttes: | + | All subject models and drawings must be updated at the same time. |
- | Utarbeide kontrollplan etter STY 600189 Instruks for utarbeidelse av kontrollplan. | + | Designers must undergo the procedures to ensure the quality of the content. If no other quality assurance methods have been agreed, the following points shall be used: |
- | Bruk av faglige sjekklister. | + | |
- | Tverrfaglig gjennomgang av modell og tegningsproduksjon. | + | |
- | Samtidig revisjon, levering og publisering av resultatmodeller og tegninger. | + | |
- | Gjennomgang og signering av arbeidet sammen med kontrollerende og godkjennende på digitale leveranser. Signatur / | + | |
- | Det må ikke gjøres endringer i modellen etter at prosjektet har gitt den status godkjent. | + | |
- | Gjennomføringen | + | |
- | av kvalitetssikringen skal dokumenteres og følge prosjektet. | + | |
- | ==== Stikningsdata ==== | + | * Prepare control plan according to STY 600189 Instruction for preparation of control plan. |
- | Resultatmodellene skal leveres med stikningsgrunnlag til entreprenør. Objektene skal leveres på en slik måte at de egner seg for produksjon av stikningsgrunnlag der referansepunkt og linjer ligger på riktig lag (prefiks R). Objekter med entydig definert geometri leveres som volumer eller flater. Objekter med antatt geometri skal i tillegg leveres med referansepunkter/-linjer for stikning (f.eks. punkt for senter kum, linje for bunn innvendig rør). | + | * Use of professional checklists. |
+ | * Interdisciplinary review of model and drawing production. | ||
+ | * Simultaneous revision, delivery and publication of result models and drawings. | ||
+ | * Review and signing of the work together with control and approval of digital deliveries. Signature | ||
+ | * No changes must be made to the model after the project has given it status. | ||
+ | * The implementation | ||
- | Stikningsdata i modellen med lag som har prefiks «R» vil være lett å finne og trekke disse dataene til utstikningskatalogen avhengig av programvare. Derfra vil de kunne genereres til stikningsvennlig format. | + | ==== laying out ==== |
+ | The result models must be delivered with data for laying out to the contractor. The objects must be delivered in such a way that they are suitable for the production of laying out bases where the reference point and lines are on the correct layer (prefix R). Objects with uniquely defined geometry are supplied as volumes or with surfaces. Objects with assumed geometry must also be provided with reference points / lines for stitching (eg center socket point, line for bottom inner tube). | ||
- | Stikningsdata skal ha samme kvalitet som inngangsdata. Inngangsdata vil normalt være etablert ut fra innmålte | + | Laying out data in the model with layers that have prefix " |
+ | Laying out data should be of the same quality as input data. Input data will normally be established based on measured data. Projection should therefore be set out on the same fixed marking basis from which the measurement was made. Points in the route and points that are close to the train leading route should not be deployed with GPS equipment. | ||
==== Kontroll av produksjon ==== | ==== Kontroll av produksjon ==== | ||
fag/felles/tegninger-en.txt · Sist endret: 2019/09/13 07:04 av stun